July 1 - Across America on a Motor Bicycle

(Rochester to Cayuga, NY)

G.Wyman

"It took until 11:30 o'clock the next day, July 1, to get the motor working, and then I started from Rochester with C.O. Green, superintendent of the Regas Company, and W.L. Stoneburn, the bookkeeper, riding with me as an escort. They accompanied me 20 miles to Fairport. over roads so muddy as to be nearly impassible. Not far from Fairport, when I was alone again the hoodoo asserted itself. First the connecting rod worked loose, and soon after the belt ends gave way. I lost as little time as possible, however, and at night I reached Cayuga, with the satisfaction of having covered 70 miles during the short day."

Community Memorials

701.1 Fairport

701.2 Cayuga RON - Waypoint Sign

Across America on a Motor Bicycle - "Along The Shores Of The Great Lakes And Down The Hudson To New York" by George A. Wyman, The Motorcycle Magazine, October 1903, Vol 1 No 5
Chicago, IL to New York City
June 20 to July 6, 1903

June 30 - Across America on a Motor Bicycle

(Buffalo to Rochester, NY)

"I left Buffalo at 5:20 a.m., determined, if possible, to get to New York by July 2. and join in the endurance run to Worcester that started on the third. After I had gone 10 miles the lacing holes in the belt broke away again. I then put on the old original belt with which I had started from San Francisco and which I had removed at Chicago. but still carried with me. Everything went finely for the next few miles, and then the connecting rod of the motor broke. Everything seemed to me to be going to pieces. There was nothing for it then but to pedal, and I churned away for five miles into Batavia. It was only 9 a.m. when I got there, and it took until 3:30 p.m. to get the repairs made so that I could start again. 

It went all right until I was 12 miles from Rochester, and then the valves got to working so poorly that I could not make more than five miles an hour with it. I managed to reach a cycle store in Rochester, and there I went to work, intending to get it fixed and ride half the night to make up for lost time. It was of no use. I worked until 11 p.m., and then gave it up until morning. I realized then that the motor and bicycle were suffering from crystallization. There were no flaws or defects of any sort in the parts that were breaking. They were just giving out all at once, like the Deacon's famous shay that lasted him so well and so long and was not weaker in any one part than in another. In spite of all my troubles, I had made 80 miles that day, and I still had hopes of being in New York in time for the fireworks."

Community Memorials

630.1 Batavia

630.2 Regas Bicycle Rochester - Waypoint Sign

Across America on a Motor Bicycle - "Along The Shores Of The Great Lakes And Down The Hudson To New York" by George A. Wyman, The Motorcycle Magazine, October 1903, Vol 1 No 5
Chicago, IL to New York City
June 20 to July 6, 1903

June 29 - Across America on a Motor Bicycle

(Angola to Buffalo, NY)

"I spent two hours in a repair shop in Angola the next morning, June 29, and at the end of that time the repairer pronounced the forks mended sufficiently to carry me through to New York. I did not feel as confident about this as the repairman did. I got to Buffalo by 11 o'clock, and after a visit to the post office,

E.R.Thomas Factory

I rode out to the E. R. Thomas automobile and motor bicycle factory. There I met Mr. F. R. Thomas for the first time, and I must pay a tribute to his generous hospitality, which I shall always remember. His kindness was all the more magnanimous when it is remembered that I was riding the product of a rival maker. The first thing Mr. Thomas did was to send my bicycle inside and have it seen to that it was supplied with oil and gasoline. Then he learned that my forks were in bad shape, and he ordered men to get to work and make a new pair for it and finish them at night. The men worked in the factory until 9 o'clock that night on my forks, and had them ready for me to make an early start in the morning. For all this Mr. Thomas. would not accept payment. In the meantime he showed me through his factory, and then lent me an Auto-Bi, on which I took a trip about the city."

Community Memorials

629.1 Thomas Motors Buffalo

Across America on a Motor Bicycle - "Along The Shores Of The Great Lakes And Down The Hudson To New York" by George A. Wyman, The Motorcycle Magazine, October 1903, Vol 1 No 5
Chicago, IL to New York City
June 20 to July 6, 1903

June 28 - Across America on a Motor Bicycle

(Conneaut, OH to Angola, NY)

"My hoodoo was with me all the next day. I left Conneaut at 7:30 a.m., and before  I had gone quite 10 miles the oil began to leak out of the crankcase, although I had done my best to make it tight and seal it with white lead the night before. The belt again gave out and I had my own profane troubles with these two defects all day. First it was the oil, and then the belt, and I became so disgusted before noon that I felt like shooting the whole machine full of holes and deserting it. This was my first visit to Pennsylvania - for I been riding in the little 50-mile strip of the Keystone Stare that borders on Lake Erie ever since leaving Conneaut - and I can say that all my Pennsylvania experiences were hard ones. The roads were fairly good and for most of the way I rode on footpaths at the side of the road. The view from the road with the luxuriant verdure clad bluffs on one side and the horizon bounded expanse of the great lake on the other side was as magnificent as I had seen. It reminded me of the good old Pacific.

By afternoon I had crossed the Pennsylvania strip and at last was in New York state. It seemed as if I was nearing home then, but it is a big state, and I came to realize the truth of the song that "its a blanked long walk to the gay Rialto in New York." I didn't have to walk, but walking would have been easier than the way I traveled from the western boundary of the Empire State to the metropolis. It was on the afternoon of June 28 that I entered the state, and it was eight days later before I got to the confines of the great city.

USGS, c.1899

I had hoped to reach Buffalo on the day I left Conneaut but was still 25 miles from the Queen City when my troubles climaxed by the breaking of a fork side. The crystallization resulting from the continuous pounding was telling again. I walked two miles to Angola, and there sought a telegraph office, and wired Chicago for a pair of new forks. I learned that I would not be able to get a pair there for two days, because they would have to go first to Buffalo and then be reshipped to Angola. I therefore determined to get the forks repaired there if possible, and make them do till I got to Buffalo. It is a fortunate thing that I was not riding fast or going downhill when the fork side broke. I was told that automobiles and motor bicycles frequently traveled the road that I took from Chicago to New York, but the behavior of the natives belied it. People all came running out of the houses when I passed, and they stared as if they never had seen a motor bicycle before."

Community Memorials

628.1i Pennsylvania "Keystone Strip"

628.1 Forks Broke - Waypoint Sign & Memorial Plaque

628.2 Angola RON - Waypoint Sign & Memorial Plaque

Across America on a Motor Bicycle - "Along The Shores Of The Great Lakes And Down The Hudson To New York" by George A. Wyman, The Motorcycle Magazine, October 1903, Vol 1 No 5
Chicago, IL to New York City
June 20 to July 6, 1903

June 27 - Across America on a Motor Bicycle

(Cleveland to Conneaut, OH)

"It was on the day I left Cleveland, June 27, that my troubles began to come thick and fast. I started from Cleveland at 10 a.m. and had gone only a mile when the lacing holes in my driving belt gave way and I had to stop and relace. For the first five miles the road was fine, and then I came to a stretch where the road was being rebuilt and I had to walk for a mile and a half. After that, I had a plank road for six miles, and then it was sandy for 30 miles, all the way to Geneva. From there to Conneaut, 22 miles, the road was good in places, with occasional stretches of clay and sand, through which it was hard going. It was a dreary day of travel through a pretty farming country, where the ranchers seemed to be as heavy witted as the cattle. The belt broke five times during the afternoon, and the last time I fixed it I laced It with two inches of space between the ends in order to make it reach. 

I passed through town after town, where I wondered what the people did for recreation. There was nothing for them to do after their day's work but to walk around the block and then go to bed. One thing I noticed is that it is a poor country for shoemakers for nearly everyone I saw, men, women and children, were barefooted. It was plain that much of the country I saw was settled by immigrant farmers from Germany and other parts of Europe. I made only 75 miles this day. When I arrived in Conneaut, I got a piece of belting at a bicycle store and spliced my troublesome piece of driving leather. Then I discovered that the screws in the crankcase of the motor were all loose, so I put in some white lead and tightened them. It was so late by this time that I concluded to remain at Conneaut that night."

Community Memorials

627.1 Geneva - Waypoint Sign

627.2 Conneaut RON - Waypoint Sign and Memorial Plaque

Across America on a Motor Bicycle - "Along The Shores Of The Great Lakes And Down The Hudson To New York" by George A. Wyman, The Motorcycle Magazine, October 1903, Vol 1 No 5
Chicago, IL to New York City
June 20 to July 6, 1903

June 26 - Across America on a Motor Bicycle

(Perrysburg to Cleveland, OH)

"From Perrysburg I got a 7 o'clock start, but soon discovered that I did not have any more lubricating oil than enough to last for 30 miles. By economizing I managed to reach Tremont(sic Fremont) where I got some oil at a machine shop. It was so thick that I had to heat it before it would run, but it was better than nothing. After leaving Fremont the roads began to grow very poor. There had been several days of rain on them Just before I came along and as they were simply dirty roads for repeated stretches of 10 miles or more the mud was deep and wide.

Near Amherst about 30 miles west of Cleveland I got my first reminder of the one-horse story and a foretaste of what was in store for me. The truss on the front forks of my bicycle broke. When I stopped to remove the remains of it, I found that it had crystallized so that it was like a piece of old rusty iron. It broke in several places like a stick of rotten wood. That was the effect of the terrible pounding the machine had received over the railroad ties.  It occurred to me at the time that the whole machine must have suffered similarly, but it did not show signs of disintegrating at the time, and I concluded it would carry me to New York. After leaving Elyria, 25 miles from Cleveland, I struck a good side-path that continued for 20 miles. It was only six inches wide in places, but those few inches spelled salvation for me, because the road was so heavy with sand that if I had not had the path to ride I would have had to have walked for long stretches. Just out of Elyria I met an automobile, and it was having a hard time of it. It was all the engine could do to keep it moving. The last five miles into Cleveland I went over the best roads I ever had ridden on anywhere in my life.

It was 7 p.m. when I reached Cleveland. and my first move was to hunt up an automobile station in order to get some oil. At the Oldsmobile branch I found what I wanted, and they gave me enough to last for 300 miles, all I cared to carry, in fact. They took a lively interest in me and my bicycle and examined my motor carefully. Like everyone else, though, they had to be shown the photographs of my start from San Francisco before fully accepting my statement that I had come from California. My distance for this day, to Cleveland, was 121 miles, and I used five quarts of gasoline."

Community Memorials

626.1 Fremont - Waypoint Sign

626.2 Near Amherst

626.3 Elyria

626.4 Cleveland RON

Across America on a Motor Bicycle - "Along The Shores Of The Great Lakes And Down The Hudson To New York" by George A. Wyman, The Motorcycle Magazine, October 1903, Vol 1 No 5
Chicago, IL to New York City
June 20 to July 6, 1903

Wyman Memorial Plaque Dedication - Kearney Nebraska

The Great Platte River Road Archway Monument Partners With the George A. Wyman Memorial Project to Celebrate a Historic Ride

Imagine in 1903 being the first person to complete a transcontinental trip across the United States using a motorized vehicle. George A. Wyman did just that on a 50-day ride using a single cylinder, 1.25 horsepower 1902 “California” motorcycle. Starting in San Francisco and ending in New York City, most of Wyman’s route across Nebraska closely followed the Great Platte River Road. In recognition of that historic event The Great Platte River Road Archway Monument along with the George A. Wyman Memorial Project will be dedicating a Wyman Memorial Plaque & Waypoint sign at the Monument as part of the Archway’s 25th Anniversary celebration on June 14th 2025.

For 25 years The Great Platte River Road Archway Monument has told the story of one of the most important transportation routes in American history. With its outstanding museum exhibits and expansive campus grounds located adjacent to the landmark Archway across I-80, the Archway Monument has consistently been ranked as the Number 1 tourist attraction in Nebraska. Stacy Schwartz, Executive Director of The Great Platte River Road Archway Monument stated, “Working with the George A. Wyman Memorial Project to establish an official Wyman Waypoint on our campus grounds will add another important chapter to the history of the Great Platte River Road and is an oft forgotten part of the roads’ history. We look forward to everyone joining us on June 14th to celebrate the 25th Anniversary of the Archway Monument and dedication of the Wyman Waypoint.”

The Archway Monument with its focus on the history of the Great Platte River Road is a most fitting location for a Wyman Waypoint. 

Additional information on The Great Platte River Road Archway Monument and their 25th Anniversary Celebration 

Special thanks to David & Tracy Hoover, Wyman Memorial Project Waypoint Coordinator for Nebraska and Iowa. They are also the sponsors for the Wyman Memorial Plaque for waypoint 609-3 Kearney.